BNWDP - AVCOAT 8039CCF,COMPONENT II, (SEE SUPP)

  • MSDS: BNWDP
  • Manufacturer: TEXTRON SPECIALTY MATERIALS
  • Product Name: AVCOAT 8039CCF,COMPONENT II, (SEE SUPP)
  • National Stock Number: 8030-01-212-5023
Product Identification

Product ID:AVCOAT 8039CCF,COMPONENT II, (SEE SUPP)
MSDS Date:03/24/1990
FSC:8030
NIIN:01-212-5023
Kit Part:Y
MSDS Number: BNWDP

Responsible Party
TEXTRON SPECIALTY MATERIALS
2 INDUSTRIAL AVE
LOWELL, MA 01851
US

Emergency Phone: 508-454-5355

Info Phone: 508-452-8961

Preparer: F.R. WALNUT

Cage: 63262

Contractor
TEXTRON SPECIALTY MATERIALS, SUB OF TEXTRON INC
LOWELL, MA 01851-5107 US

Telephone: 508-452-8961

Cage: 63262

Ingredients

METHYL ETHYL KETONE PEROXIDE (MEKP)

CAS: 1338-23-4

RTECS: EL9450000

Fraction By Weight: 28%

OSHA PEL 0.7 PPM C

ACGIH TLV: 0.2 PPM C

EPA Report Quantity: 10 LBS

DOT Report Quantity: 10 LBS


HYDROGEN PEROXIDE

CAS: 7722-84-1

RTECS: MX0900000

Fraction By Weight: 5%

OSHA PEL 1 PPM

ACGIH TLV: 1 PPM


DIMETHYL PHTHALATE

CAS: 131-11-3

RTECS: TI1575000

Fraction By Weight: 42%

OSHA PEL 5 MG/M3

ACGIH TLV: 5 MG/M3

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


METHYL ETHYL KETONE

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 2%

OSHA PEL 200 PPM

ACGIH TLV: 200 PPM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Hazards

LD50 LC50 Mixture:N/K
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CHRONIC EXPOSURE MAY CAUSE PERMANENT
EYE INJURY.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES:IRRITATION AND REDNESS.POSSIBLE PERMANENT
EYE INJURY WITH CHRONIC EXPOSURE.SKIN:IRRITATION AND
REDNESS.INGESTION/INHALATION:N/K .
Medical Cond Aggravated by Exposure:EYE AND RESPIRATORY
CONDITIONS,DERMATITIS.

First Aid

First Aid:EYES:FLUSH WITH WATER FOR 15 MINUTES.SEEK MEDICAL
ATTENTION.SKIN:WASH THOROUGHLY WITH SOAP AND WATER.INGESTION:INDUCE
VOMITING AND SEEK MEDICAL ATTENTION.INHALATION:REMOVE TO FRESH
AIR.GIVE ARTIFICIAL RESPIRATION IF NECESSARY.

Fire Fighting

Flash Point Method:SCC
Flash Point:140F,60C
Autoignition Temp:Autoignition Temp Text:U/K
Extinguishing Media:WATER (MOST EFFECTIVE),WATER FOG,CARBON
DIOXIDE,FOAM.DRY CHEMICAL CAN CAUSE METHYL ETHYL KETONE PEROXIDE TO
REIGNITE.
Fire Fighting Procedures:PERSONNEL EVACUATION IS PRIMARY.FIGHT BLAZE
FROM A SAFE DISTANCE/EXPLOSION PROOF LOCATION.COOL EXPOSED CONTRS
W/ WATER SPRAY.REMOVE NON-BURNING MATL (SEE SUPP)
Unusual Fire/Explosion Hazard:IF CONFINED IN A RIGID CONTAINER
(GLASS,METAL,THICK PLASTIC,ETC.),IT COULD RUPTURE
VIOLENTLY.EXPOSURE TO TEMP >145F,62.78C MAY RESULT IN VIOLENT
DECOMPOSITION.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION.COVER WITH
NONCOMBUSTIBLE,ABSORBENT MATERIAL.PICK UP MATERIAL WITH
NON-SPARKING TOOLS.WASH AREA WITH DETERGENT AND WATER.
Neutralizing Agent:N/K

Handling

Handling and Storage Precautions:STORE AWAY FROM OTHER MATERIALS IN A
COOL PLACE IN ORIGINAL CONTAINERS.STORE AWAY FROM DIRECT
SUNLIGHT,HEAT,FLAME OR SPARKS.
Other Precautions:DO NOT ADD TO HOT MATERIAL.AVOID ALL SOURCES OF
CONTAMINATION.ONLY GLASS,POLYPROPYLENE,TEFLON,POLYETHYLENE OR
CERAMIC CONTAINERS,FUNNELS OR MEASURING DEVICES SHOULD BE USED TO
AVOID METAL CONTAMINATIO N DURING HANDLING.

Exposure Controls

Respiratory Protection:REQUIRED TO PREVENT INHALATION OF HEATED VAPORS
OR MISTS IF NO VENTILATION.
Ventilation:GENERAL DILUTION VENTILATION.LOCAL EXHAUST REQUIRED.
Protective Gloves:CHEM RESISTANT POLYETHYLENE OR (SEE SUP)
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:SAFETY SHOWER & EYE WASH STATION SHOULD BE
AVAILABLE.
Work Hygienic Practices:THOROUGHLY WASH HANDS BEFORE EATING,BREAKS OR
SMOKING.REMOVE AND WASH CONTAMINATED CLOTHING.
Supplemental Safety and Health
PART NO:(SEE 8030-01-190-3938).SPEC GRAV:1.11-1.17 (WATER=1).REACTIVITY
IN WATER:NONE.FIRE FIGHT PROC:TO A SAFE LOCATION ASAP.WEAR
SELF-CONTAINED BREATHING APPARATUS TO AVOID INHALATION OF SMOKE AND
V APORS.PROT GLOVES:NONSOLUBLE PLASTIC.

Chemical Properties

Boiling Pt:B.P. Text:DECOMPOSES
Decomp Temp:Decomp Text:N/K
Vapor Density:>1,AIR=1
Spec Gravity:SEE SUPP DATA
Evaporation Rate & Reference:N/K
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR,COLORLESS LIQUID WITH A LOW ODOR.

Stability

Stability Indicator/Materials to Avoid:NO
CONTAMINATION,AMINES,ORGANIC METAL SALTS AND STRONG OXIDIZING AND
REDUCING AGENTS,MINERAL ACIDS,ALKALIES.
Stability Condition to Avoid:DIRECT SUNLIGHT,OPEN FLAME,HEAT
SOURCES,SPARKS,STATIC ELECTRICITY,ELECTRICAL SWITCH GEAR AND
CONFINEMENT UNDER PRESSURE.
Hazardous Decomposition Products:CARBON MONOXIDE,CARBON DIOXIDE,DENSE
SMOKE,INTENSE HEAT.

Disposal

Waste Disposal Methods:DISP MUST BE IAW FED,STATE & LOC
REGS.COORDINATION W/ SUPPORTING INSTALLATION &/OR MACOM
ENVIRONMENTAL COORDINATION PRIOR TO DISP IS REC TO DETERM APPROP
DISP METHODS .INCIN FROM SAFE DISTANCE.D IMETHYL PHTHALATE &
HYDROGEN PEROXIDE:SARA LISTED.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.